Items where Year is 2010

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Jump to: B
Number of items: 6.

B

Para:BS 8313:1997 Selection and installation of fire-resistant power and control cable systems for life safety and fire-fighting applications - Code of practice

Establishes life safety and fire-fighting electrical loads and details the performance requirements of the electrical distribution system in terms of fire survival time, to maintain integrity in defined fire conditions for a specified period.Establishes life safety and fire-fighting electrical loads and details the performance requirements of the electrical distribution system in terms of fire survival time, to maintain integrity in defined fire conditions for a specified period.

Para:BS EN 13238:2010 Reaction to fire tests for building products - conditioning procedures and general rules for selection of substrates

Describes conditioning procedures for test specimens and includes rules for selection of substrates for construction products when carrying out reaction to fire tests.

Para:BS EN 15102:2019 Ventilation for buildings - fire dampers

Includes requirements, test methods, evaluation and conformity and marking for fire dampers.

Para:BS EN 15650:2010 Ventilation for buildings. Fire dampers

Includes requirements, test methods, evaluation and conformity and marking for fire dampers.

Para:BS EN 1993-1-2:2005 Eurocode 3. Design of steel structures General rulesStructural fire design

Gives requirements for resistance, serviceability, durability and fire resistance of steel structures.

Para:BS EN 520:2004+A1:2009 Gypsum plasterboards - Definitions, requirements and test methods (+A1:2009) (incorporating corrigendum July 2006)

This document specifies the characteristics and performance of gypsum plasterboards intended to be used in building construction works including those intended for secondary manufacturing operations. It includes boards designed to receive either direct surface decoration or gypsum plaster. This document covers the following product performance characteristics: reaction to fire, water vapour permeability, flexural strength (breaking load), impact resistance and thermal resistance. The following performance characteristics are linked to systems assembled with plasterboards: shear strength, fire resistance, impact resistance, direct airborne sound insulation and acoustic absorption to be measured according to the corresponding European test methods. If required, tests should be done on assembled systems simulating the end use conditions. This document covers also additional technical characteristics that are of importance for the use and acceptance of the product by the Construction Industry and the reference tests for these characteristics. It provides for the evaluation of conformity of the product to this document. This document does not cover plasterboards, which have been subject to any secondary manufacturing operations (e.g. insulating composite panels, plasterboards with thin lamination, etc.).

This list was generated on Thu Oct 21 20:09:13 2021 UTC.