Items where Year is 2008

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Jump to: B | N
Number of items: 8.

B

Para:BS EN 1125:2008 Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods

Details requirements for manufacture, performance and testing of panic exit devices for use in a panic situation on escape routes, mechanically operated by a horizontal push-bar or horizontal touch-bar.

Para:BS EN 1634-2:2008 Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware. Fire resistance test for door and shutter assemblies and openable windows (+A1:2018) (Incorporating corrigendum August 2018)

Looks at the influence on fire performance of building hardware items incorporated into hinged or pivoted vertically installed fire door assemblies or vertically installed openable window assemblies, with fire resistance up to and including 240 minutes.

N

10.1/05 Para:UNSPECIFIED Carports - fire separation

Paragraphs 5.4, 5.5 and Diagram 10 in Approved Document B Vol 1 (2006) (England & Wales) refers to separation between a house and a garage. Is the same standard of separation required between a house and a carport?

6.7/08 Para:UNSPECIFIED Egress windows and conservatories

In England and Wales can conservatories be located beneath first floor emergency egress windows in two storey properties?

6.7/11 Para:UNSPECIFIED Fire doors to bathrooms

Is a fire door required to a bathroom within a three storey dwelling, where the bathroom can be accessed from both the stairwell and an adjoining bedroom?

6.3/01 Para:UNSPECIFIED Firestopping to garage walls

Should the wall between an integral garage and the house be built up between the floor joists to the underside of the floor decking?

HB1674 09/06 Para:UNSPECIFIED Loft hatches and fire resistance

In houses of three or more storeys, are half-hour fire resistant loft hatches/roof void access panels required in the ceiling below a roof space or to roof voids to rooms in the roof?

6.3/07 Para:UNSPECIFIED Sockets and switches in light steel framed separating walls

Is it acceptable to install recessed electrical sockets and switches in light steel framed separating walls?

This list was generated on Fri Oct 22 08:57:27 2021 UTC.